Wednesday, September 21, 2011

Solve Draining Problems with Utility Sink Pumps - Home and Family ...

Utility sink pumps fill a need that is present when utility sinks are installed in basement areas that that are below the sewer and septic lines of the house. Sinks that are below the primary drainage system of the home often do not have the necessary plumbing installed to fight gravity and push the water to the pipes efficiently. Instead of installing a new plumbing system of laying down more pipes, utility sink pumps can pump waste water to the drain line so that it can be adequately removed from the home.
Utility sink pumps can be installed in three primary locations. Larger pump units will likely need to be installed off to the side of the sink. Smaller pumps can fit underneath the counter to keep them out of the way. Other utility sink pumps can be installed directly under the sink, mounting to the fixture itself. The location you install the sink pump will depend on the size of the pump as well as the layout of the sink and what space is available to you. With the location of the pump settled upon, install PVC pipe from the sink drain to the pump. Before cementing the pipe ends into place, be sure to clean them with pipe cleaner. Some utility sink pumps are equipped with a filtering system. There are also independent filters that can be installed. If neither of these is available to you, be sure to install a trap in the drain line to prevent silt and other debris from entering the pump.
Cut into the most accessible and nearby drain line and install a tee line from which you can tee some more PVC pipe into the pump unit. Utility sink pumps need a check valve installed to prevent water from flowing back and forth between the pump and the drain line unfettered. Install this valve about one foot from the tee fittings, cleaning the fittings and couplings before sealing them with cement. At the pump unit, connect the drain line to the outlet port of the utility sink pumps then check to make sure the joints are secure and tight. Connect the pump to a power supply, generally an AC outlet, and get ready to test the sink and the pump unit.
Utility sink pumps are a valuable complement to any basement sink that does not have sufficient access to the draining system of the home. Whether it is for a laundry room or a mini bar, having an alternative method of draining water from these sinks instead of installing brand new plumbing can save both time and money. The experts at your local home improvement store can help you figure out which utility sink pumps will be best for your particular needs. The size, type, and location is will be installed are important factors to consider with utility sink pumps. The staff at the home improvement store can also help with any questions or issues that come up during installation as well as proper maintenance procedures for utility sink pumps.

Source: http://authorarticle.com/home-and-family/solve-draining-problems-with-utility-sink-pumps/

snl corset tampa bay rays lionel richie notre dame football andy murray jerusalem

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.